Our system detected that your browser is blocking advertisements on our site. Please help support FoxesTalk by disabling any kind of ad blocker while browsing this site. Thank you.
Jump to content
Daggers

What grinds my gears...

Recommended Posts

shocking to hear that aj - hope your girlfriend's ok... as parafox said, she's gonna need a lot of support from those close to her.

Link to comment
Share on other sites

someone tried to rape my girlfriend

so sorry,that is the most horrendous thing ive heard for a long time,i cant even begin to imagine how your girlfriend or yourself must be feeling.Its probably going to be a real rocky road pal.Though Parafox,having been through a similar situation through his daughter will know what lies ahead,and i wish your girlfriend,you and her family all the best(of little help i know).I dont know you or your girlfriend,but im so angry for you.That piece of shit deserves the death penalty and im not joking.

Thinkingof you pal.

Link to comment
Share on other sites

Apologies for being trivial but i ****ing hate edging in when painting. It's needlessly time consuming. :@

And then, when you've been really careful and used masking tape, when you peel it off it pulls paint off with it... FFFF***CCKK

Link to comment
Share on other sites

Being up at this stupid hour every day.

lol, you kipped yet? Been on it all night and loving it.

americanscott (off this forum) is in my ****ing bed meaning i'm gonna crash somehwere eventually. 5pm wake up and start again. Get on it.

Link to comment
Share on other sites

Apologies for being trivial but i ****ing hate edging in when painting. It's needlessly time consuming. :@

spot on,i hate it with a passion and to make things worse the other sales rep with me is king of cutting in and comes to my house once a month,so if i have done any painting inspects and rips my skills(or lack of)to bits.He has yet to offer his services,but he does supply some good porn,so i will let him off!

Link to comment
Share on other sites

lol, you kipped yet? Been on it all night and loving it.

americanscott (off this forum) is in my ****ing bed meaning i'm gonna crash somehwere eventually. 5pm wake up and start again. Get on it.

Kick him out your bed, man!

Link to comment
Share on other sites

Some ****er reversing into my car, doing damage and not leaving a note!!

it's a pity no-one was around to get a photo of it !!

seriously though , tough luck ,and i've had it done to me a couple of times too

it really is annoying

Link to comment
Share on other sites

it's a pity no-one was around to get a photo of it !!

seriously though , tough luck ,and i've had it done to me a couple of times too

it really is annoying

It appears as i have been on the phone most of the morning, someone has come along and fixed the minor damage to it!! WTF!!

Without me knowing! :S

Link to comment
Share on other sites

It appears as i have been on the phone most of the morning, someone has come along and fixed the minor damage to it!! WTF!!

Without me knowing! :S

sometimes if it was only minor damage to a plastic moulding , the dent sometimes pops out of it;'s own accord. due to vibration etc as you travel along .

this has also happened to me and left me scratching my head as to what had happened :D

Link to comment
Share on other sites

sometimes if it was only minor damage to a plastic moulding , the dent sometimes pops out of it;'s own accord. due to vibration etc as you travel along .

this has also happened to me and left me scratching my head as to what had happened :D

Confused.com lol

Link to comment
Share on other sites

Apologies for being trivial but i ****ing hate edging in when painting. It's needlessly time consuming. :@

It's called cutting in. :rolleyes:

And then, when you've been really careful and used masking tape, when you peel it off it pulls paint off with it... FFFF***CCKK

That's why (good) painters nearly never ever use masking tape. If you've got to use tape use 'low tack' tape and leave it on the surface for the shortest time possible. Remove it very carefully.

Edited by Webbo
Link to comment
Share on other sites

smoke alarms!!

First, the battery always goes at around 2am, just to ensure that the incessant "pipping" kicks off while your sounds asleep, then you replace the battery and all is well, until around 2 am the next morning when the pipping recommences.

You then figure it must be the downstairs smoke alarm and replace the batery in that.... but... a couple of hours later, the "pipping" is back... SHITTY ****ING Tesco batteries you think and after a few days of occasional pipping, then a few days without any.. you give in and get more expensive batteries.

repeat the above... and yet... after a week of silence... the PIPPING starts again!!!

annyway... after another few days of pipping you try putting one in the shed outside... but STILL the one inside is pipping....

another couple of days...of pipping.. your insanity level reACHING ALMOST MAXIMUM... when you suddenly notice...

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

a THIRD ALARM!!!!!!!!!! tucked on the roof in a corner :crylaugh::rolleyes: its been this one pipping the whole fooking time :crylaugh: ..why did it stop on occasion?? buggered if i know!!

:doh::frusty:

Link to comment
Share on other sites

Some ****er reversing into my car, doing damage and not leaving a note!!

It wasn't a green car was it? :ph34r: I presume it happened in Syston? :dunno:

This car looked quite nasty from the back. (In the car park opposite 'Today's Catch' fish bar)

Link to comment
Share on other sites

It wasn't a green car was it? :ph34r: I presume it happened in Syston? :dunno:

This car looked quite nasty from the back. (In the car park opposite 'Today's Catch' fish bar)

The culprit makes himself known. Well, it was probably Wymsey's chauffeur anyway. You just can't get the help these days :whistle:

  • Like 1
Link to comment
Share on other sites

It's called cutting in. :rolleyes:

That's why (good) painters nearly never ever use masking tape. If you've got to use tape use 'low tack' tape and leave it on the surface for the shortest time possible. Remove it very carefully.

Correcting my terminology won't help me but doing the kitchen and utility would :whistle:

Edited by FoxyPV
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...